Tunneling Magnetoresistive Heads Beyond 150>tex<$hboxGb/in^2$>/tex<

Tunneling magnetoresistive (TMR) readers capable of 150 Gb/in/sup 2/ of areal density magnetic recording for hard disk drive were demonstrated with bit-error-rate performance. The head design used is basically a bottom type stack of Ta/PtMn/CoFe/Ru/CoFe/oxide barrier/CoFe/NiFe/Ta cap with abutted hard bias stabilization. The electrical reader width is about 4 /spl mu/'' to reach a very high track density and shield-to-shield spacing is about 700 /spl Aring/ for high linear density. On-track bit error floor is better than 10/sup -5/ at a linear density of 900 KBPI and the recording system noise is dominated by the media. The best areal density achieved (using -4 OTC reference level) is 143 Gb/in/sup 2/ using symmetric squeeze and 152 Gb/in/sup 2/ using asymmetric squeeze method, respectively. It was found that the TMR head has several decibels more signal-to-noise ratio gain over spin valve readers at 150 Gb/in/sup 2/ and beyond. The TMR head is also suitable for perpendicular recording application.