Fluidized Bed Steam Gasification of Solid Biomass - Performance Characteristics of an 8 MWth Combined Heat and Power Plant

The work focuses on a dual fluidized bed gasification technology that is successfully operated for combined heat and power production at a scale of 8 MWth in Guessing/Austria since 2002. The reactor concept consists of a circulating fluidized bed system with a steam-fluidized bubbling bed integrated into the solids return loop. Accompanying the operation of the commercial scale plant, parameter models have been developed and validated by comparison to measured data. As the models naturally fulfill mass and energy balances, the simulation also allows the validation of measurement data. The behaviour of the plant is studied by carrying out variations of selected parameters. Evaluation of different plant operation cases yields correlations between process variables. The solids circulation rate is shown versus riser exit velocity. Fuel water content and gasification temperature significantly influence global plant performance. Simulation predicts the efficiency of the existing power plant in optimized operation. Finally, part load behaviour is investigated and performance maps of the CHP plant are presented. High fuel water content at high gas engine load results in high gas velocities in the riser (erosion limit) and higher heat ratio in the produced energy. It is concluded that CHP-concepts based on fluidized bed steam gasification can reach high electric efficiencies and high overall fuel utilization rates even at small plant capacities of about 10 MWth.