Complete stabilization of a tearing mode in steady state high-β_pH-mode discharges by the first harmonic electron cyclotron heating/current drive on JT-60U

A tearing mode with m = 3 and n = 2, destabilized in the steady state high-βp H-mode discharges with edge localized mode (ELM), was completely stabilized by local heating and current drive using the 110 GHz first harmonic O-mode electron cyclotron (EC) wave. Here, m and n are poloidal and toroidal mode numbers, respectively. The optimum EC wave injection angle was determined by identifying the mode location from an electron temperature perturbation profile and a safety factor profile. The optimum injection angle was also determined by scanning a steerable mirror during a discharge. In a typical discharge where the tearing mode is completely stabilized, the ratio of the electron cyclotron heating power to the total heating power is 0.17, and the ratio of the EC driven current to the total plasma current is 0.02. Stored energy and neutron emission rate were higher for the case with EC wave injection than that without EC wave injection, which suggests that the reduction of the stored energy and the neutron emission rate was recovered by the tearing mode stabilization.