Recent results from divertor operation in ASDEX Upgrade

The results of divertor studies on ASDEX Upgrade, at currents of up to 1.2 MA and heating powers up to 10 MW are described, with emphasis on the ELMy H-mode. The spatial and temporal characteristics of their heat load, and the simulation of ELMs by a time-dependent scrape-off layer code are described. High gas puff rates were found to lead to a large increase in divertor neutral pressure, at modest changes in ne, and to a strong reduction in time-averaged power flow and complete detachment from both target plates in between ELMs. Using pre-programmed puffs of neon and argon, the radiative power losses could be raised to 75% of the heating power, in H-regime discharges, and the regime of enhanced divertor neutral pressure was found also to lead to an improved pumping of recycling impurities.