Search for a command to run...
Thrust optimization of micro-synthetic pulsatile jets is studied. Cylindrical cavities with a small circular orifice at one end, and a vibrating diaphragm at the other are used for thrust generation. The governing parameters are identified and the tradeoffs between electrostatic, piezoelectric, and electromagnetic actuation methods are investigated. Optimization of the micro jets requires a solution that gives maximum diaphragm displacement while minimizing voltage. The size of the orifice diameter is chosen to maintain a formation number of 4, at which the length of an expelled slug of fluid from the exit orifice is four times the diameter of orifice. This relationship maximizes the circulation and impulse in the leading vortex rings generated by the actuator. To examine the effects of cavity dimensions, a number of actuators are constructed out of aluminum with various cavity diameter, cavity height, and orifice diameters. Piezoelectric disks bonded to brass shims are used for actuation. The jets are tested in air at various actuation voltage and wave-shape functions. Maximum thrust generation is achieved at the resonant frequency of the cavity. Hot wire anemometry is used to further characterize the jet flow field. An investigation into electrostatic, piezoelectric, and electromagnetic diaphragm actuation methods revealed that electromagnetic actuation provides the maximum diaphragm displacement using a constant voltage.