Distributed piezoelectric-polymer active vibration control of a cantilever beam

An active vibration damper for a cantilever beam was designed using a distributed-parameter actuator and distributed-parameter control theory. The distributed-parameter actuator was a piezoelectric polymer, poly (vinylidene fluoride). Lyapunov's second method for distributed-parameter systems was used to design a control algorithm for the damper. If the angular velocity of the tip of the beam is known, all modes of the beam can be controlled simultaneously. Preliminary testing of the damper was performed on the first mode of the cantilever beam. A linear constant-gain controller and a nonlinear constant-amplitude controller were compared. The baseline loss factor of the first mode was 0.003 for large-amplitude vibrations (± 2 cm tip displacement) decreasing to 0.001 for small vibrations (±0.5 mm tip displacement). The constant-gain controller provided more than a factor of two increase in the modal damping with a feedback voltage limit of 200 V rms. With the same voltage limit, the constant-amplitude controller achieved the same damping as the constant-gain controller for large vibrations, but increased the modal loss factor by more than an order of magnitude to at least 0.040 for small vibration levels.