Search for a command to run...
Abstract: Piezoelectric materials (PZT) can be used as mechanisms to transfer mechanical energy, usually ambient vibration, into electrical energy that can be stored and used to power other devices. With the recent advances in wireless and micro‐electro‐mechanical‐systems (MEMS) technology, sensors can be placed in exotic and remote locations. As these devices are wireless it becomes necessary that they have their own power supply. The power supply in most cases is the conventional battery; however, problems can occur when using batteries because of their finite life span. Because most sensors are being developed so that they can be placed in remote locations such as structural sensors on a bridge or global positioning service (GPS) tracking devices on animals in the wild, obtaining the sensor simply to replace the battery can become a very expensive task. Furthermore, in the case of sensors located on civil structures, it is often advantageous to embed them, making access impossible. Therefore, if a method of obtaining the untapped energy surrounding these sensors was implemented, significant life could be added to the power supply. One method is to use PZT materials to obtain ambient energy surrounding the test specimen. This captured energy could then be used to prolong the power supply or in the ideal case provide endless energy for the sensors lifespan. The goal of this study is to develop a model of the PZT power harvesting device. This model would simplify the design procedure necessary for determining the appropriate size and vibration levels necessary for sufficient energy to be produced and supplied to the electronic devices. An experimental verification of the model is also performed to ensure its accuracy.