Conceptual Design of a 110 kV Resistive Superconducting Fault Current Limiter Using MCP-BSCCO 2212 Bulk Material

Superconducting fault current limiters (SCFCLs) are new and attractive devices to limit short-circuit currents in power systems. In recent years, the technical feasibility of SCFCLs in medium voltage applications was successfully demonstrated in several field tests. In high voltage power systems the application of SCFCLs is very attractive too, because at this voltage level conventional devices to limit short-circuit currents are hardly applicable and system studies showed considerable economical benefits. Therefore, a German project started recently to develop a first 110 kV, 1.8 kA prototype of a resistive SCFCL. A magnetic triggered resistive concept using MCP-BSCCO 2212 bulk material will be used for the demonstrator. This paper reports about the conceptual design of this SCFCL and the project status. Focus is given on the main data of the 110 kV prototype, the SCFCL modules, the general design of the whole system and the most important high voltage design aspects. The calculations and estimations show that the conceptual design presented in this paper seems feasible and that a major technical challenge is to ensure a reliable electrical insulation system.