Microsample tensile testing of nanocrystalline metals

Abstract A novel non-contact strain measurement technique has been employed to measure the tensile properties of extremely small ‘microsamples’ of pure high-density ultrafine-grained Al (ufg-Al) nanocrystalline Cu (n-Cu) and nanocrystalline Ni (n-Ni). These microsample tests confirmed the absence of Young's modulus variations for metals with grain sizes approaching 25 nm. Significant strength enhancements were associated with the nanocrystalline specimens; the tensile stresses achieved in these microsample tests were measured to be an appreciable fraction of the theoretical shear strength for these metals. The ufg-Al samples (diameter, 250 nm) exhibited extensive plasticity while deformation in the n-Ni (diameter, 28 nm) remained almost entirely elastic up to failure at 1500MPa. The n-Cu samples were found to have a multiscale grain structure that produced an attractive balance of strength and ductility. Transmission electron microscopy investigations of deformed n-Ni failed to produce any evidence of dislocation activity. In the absence of dislocation motion, the tensile strength of truly nanocrystalline metals is remarkably high but currently dominated by intrinsic porosity and mesoscale microcrack coalescence.