Low-Power Wide Area Network Technologies for Internet-of-Things: A Comparative Review

The rapid growth of Internet-of-Things (IoT) in the current decade has led to the development of a multitude of new access technologies targeted at low-power, wide area networks (LP-WANs). However, this has also created another challenge pertaining to technology selection. This paper reviews the performance of LP-WAN technologies for IoT, including design choices and their implications. We consider Sigfox, LoRaWAN, WavIoT, random phase multiple access (RPMA), narrowband IoT (NB-IoT), as well as LTE-M and assess their performance in terms of signal propagation, coverage and energy conservation. The comparative analyses presented in this paper are based on available data sheets and simulation results. A sensitivity analysis is also conducted to evaluate network performance in response to variations in system design parameters. Results show that each of RPMA, NB-IoT, and LTE-M incurs at least 9 dB additional path loss relative to Sigfox and LoRaWAN. This paper further reveals that with a 10% improvement in receiver sensitivity, NB-IoT 882 MHz and LoRaWAN can increase coverage by up to 398% and 142%, respectively, without adverse effects on the energy requirements. Finally, extreme weather conditions can significantly reduce the active network life of LP-WANs. In particular, the results indicate that operating an IoT device in a temperature of -20 °C can shorten its life by about half; 53% (WavIoT, LoRaWAN, Sigfox, NB-IoT, and RPMA) and 48% in LTE-M compared with environmental temperature of 40 °C.