Method of Detecting Radio Signals using Means of Covert by Obtaining Information on the basis of Random Signals Model

The article presents a developed method for determining random radio signals. Random signals can be signals from hidden means of obtaining information.The signal is considered as a random process. The description of such signals is based on probability theory and the theory of random functions. In the practice of analysis of random radio signals, static methods based on the theory of stationary random functions have become widespread. The existing models of a stationary random process are not adequate for a large number of random processes, especially for processes that are dynamic in nature and are observed during a finite time interval.The developed method allows to detect signals from hidden means of obtaining information with greater efficiency. The novelty of the method is to determine the deviation of the main parameters of the signals from the function of the sample. The method is based on determining the function of a sample of signals of a given radio range. The function of the sample is obtained as the implementation of the smoothing function of a random process, by the method of least squares using the principle of sliding smoothing.It is proposed to determine the signals of the means of covert receipt of information by the instantaneous deviation of the parameters of random signals. To determine the signals of the means of covert obtaining information, it is proposed to determine the deviation of the amplitude of the random signals from the amplitude of the signals of the sample function, then, if necessary, to determine the deviation of the signal phases. So, the effectiveness of the method is achieved by determining two parameters of the deviation of the amplitude and phase. This makes it possible to detect random signals with a higher probability.Determining the function of the sample of the required radio band significantly increases the probability of determining random signals, by reducing the scanning time of a given radio band, by excluding known signals from the additional software analysis of a given radio band.