Rigorous Reliability Testing of an Encapsulated Thermal Pyrolytic Graphite (TPG) Heat Spreader for Passive Thermal Management Applications

Continued microelectronic miniaturization has resulted in higher power density, increasing the need for high performance thermal management. One possible solution for board-level thermal management is to fully encapsulate a high thermal conductivity material, such as Thermal Pyrolytic Graphite (TPG; ~1700 W/mK) in a metal (such as 6061 aluminum), producing an efficient passive heat spreader for thermal dissipation. The metal shell provides sufficient mechanical strength at a small detriment to the overall thermal conductivity. Reliability and consistent performance over time are critical for thermal management systems, especially in Defense and Aerospace applications. MIL-STD-883H provides test parameters for reliability involving exposure to mechanical shock (Method 2002.5), mechanical vibration (Method 2005.2), and thermal shock (Method 1011.9), with traditional evaluation criteria involving microelectronic device performance and/or a visual examination. For this work, the reliability of aluminum encapsulated TPG test coupons was evaluated with more demanding criteria: a visual examination, X-ray inspection, acoustic microscopy, and thermal conductivity performance testing, both before and after the previously discussed MIL-STD-883H exposures. The encapsulated coupons showed excellent robustness; the thermal conductivity properties remained constant with an average value around 965 W/mK, and the non-destructive imaging revealed excellent bond quality for the metal encapsulation, with no evidence of delamination. This more stringent evaluation criteria after MIL-STD-883H testing provides a better way to evaluate the reliability of passive thermal management systems. The study results also demonstrate the metal encapsulated TPG heat spreader as a superior thermal management solution with high performance and high reliability for demanding applications.