Microstructure and properties of TiB2/Cu composite coating with multi-layer structure prepared by electrodeposition

In order to improve the hardness of the copper surface, reduce its friction coefficient, and adjust the overall performance of the coating, a TiB2/Cu composite coating with multilayer structure was prepared by electrodeposition. The microstructure of the composite coating was analyzed by SEM and XRD. The microhardness and friction characteristics of the coating were tested, and the differences in the microstructures and properties of different coating structures were analyzed. Microstructure coatings with two layers (Cu + TiB2/Cu) and three layers (Cu + TiB2/Cu + Cu) were prepared on the copper substrate by electrodeposition. The TiB2 particles reduced the deposition rate of the TiB2/Cu composite coating by electrodeposition, by up to 29%. The TiB2 particles in the electrolyte increased the discharge voltage of the electrodeposition process. The content of TiB2 affected the microhardness, friction, and wear properties of the TiB2/Cu composite coating. The TiB2 particles increased the microhardness of the TiB2/Cu composite coating by 61%. The multilayer-structured coating prepared by electrodeposition could control the overall properties of the coating. The microhardness and friction coefficient of the TiB2/Cu + Cu coating were between those of the Cu and TiB2/Cu composite coatings.