Search for a command to run...
Ru/TiO<sub>2</sub> catalysts are well known for their high activity in the hydrogenation of CO<sub>2</sub> to CH<sub>4</sub> (the Sabatier reaction). This activity is commonly attributed to strong metal-support interactions (SMSIs), associated with reducible oxide layers partly covering the Ru-metal particles. Moreover, isothermal rates of formation of CH<sub>4</sub> can be significantly enhanced by the exposure of Ru/TiO<sub>2</sub> to light of UV/visible wavelengths, even at relatively low intensities. In this study, we confirm the significant enhancement in the rate of formation of methane in the conversion of CO<sub>2</sub>, e.g., at 200 °C from ~1.2 mol g<sub>Ru</sub><sup>-1</sup>·h<sup>-1</sup> to ~1.8 mol g<sub>Ru</sub><sup>-1</sup>·h<sup>-1</sup> by UV/Vis illumination of a hydrogen-treated Ru/TiO<sub>x</sub> catalyst. The activation energy does not change upon illumination-the rate enhancement coincides with a temperature increase of approximately 10 °C in steady state (flow) conditions. In-situ DRIFT experiments, performed in batch mode, demonstrate that the Ru-CO absorption frequency is shifted and the intensity reduced by combined UV/Vis illumination in the temperature range of 200-350 °C, which is more significant than can be explained by temperature enhancement alone. Moreover, exposing the catalyst to either UV (predominantly exciting TiO<sub>2</sub>) or visible illumination (exclusively exciting Ru) at small intensities leads to very similar effects on Ru-CO IR intensities, formed in situ by exposure to CO<sub>2</sub>. This further confirms that the temperature increase is likely not the only explanation for the enhancement in the reaction rates. Rather, as corroborated by photophysical studies reported in the literature, we propose that illumination induces changes in the electron density of Ru partly covered by a thin layer of TiO<sub>x</sub>, lowering the CO coverage, and thus enhancing the methane formation rate upon illumination.