Material Compatibility Studies of Ethanol Blended Diesel

<div class="section abstract"><div class="htmlview paragraph">The Government of India has mandated biofuel blending in automotive fuels to reduce crude oil imports and support the national economy. As part of this initiative, Oil Marketing Companies (OMCs) have begun nationwide blending of E20 fuel (20% ethanol in petrol). Ethanol supply is expected to exceed demand by the end of 2025 due to initiatives like the Pradhan Mantri JI-VAN Yojana. Alternative applications for ethanol are being explored; one promising approach is its use as a co-blend with diesel fuel (ED blends). However, ethanol’s low cetane number and poor lubricity pose challenges for direct use in diesel engines without modifications. ED blends demonstrated reduced emissions while maintaining performance comparable to conventional diesel. To further address concerns related to materials compatibility of ED blends with fuel system components, particularly plastomers that may impact engine durability, a detailed study was conducted using elastomers such as FVMQ, FKM, HNBR, and NBR in accordance with the SAE J1748. Test specimens were immersed in ED blends and conventional diesel at 55°C for 1008 hours. Key physical and mechanical properties were measured before and after the immersion tests. The results revealed that FVMQ, FKM and HNBR demonstrated comparable durability when exposed to ED blends vis-à-vis diesel, whereas NBR performed better only in conventional diesel. SEM analysis of the specimens showed significate surface degradation in NBR, supporting the mechanical test results. Although ED blends exhibited changes in fuel properties such as flash point and water content, the blends remained stable under ambient storage conditions.</div></div>