Removal of Triazine Herbicides Using Passion Fruit Waste-Derived Hydrochar

Triazine herbicides are widely used for weed control in agricultural systems, and their occurrence in water bodies has been frequently reported worldwide. This study assessed the efficiency of a hydrochar derived from the epicarp and mesocarp of passion fruit residues for the removal of three triazine herbicides (atrazine, ametryn, and metribuzin), with the aim of developing a material suitable for application in water remediation programs. The adsorption capacity of biomass and hydrochar derived from passion fruit residues was evaluated with and without activation using 0.5 mol L−1 phosphoric acid. The adsorption of herbicides was not significantly affected by pH within the range of 4 to 8. The acid hydrochar, which exhibited the highest removal capacity among the evaluated adsorbents, presented adsorption capacities of 18.05, 10.83, and 5.05 µg g−1 for atrazine, ametryn, and metribuzin, respectively. These values correspond to removal efficiencies of approximately 62%, 72%, and 52% at initial concentrations of 0.33, 0.25, and 0.15 mg L−1. The adsorption equilibrium time varied among the herbicides, reaching 4 h for atrazine and ametryn and 5 h for metribuzin. The adsorption dynamics between the adsorbents and adsorbates were best described by the pseudo-second-order kinetic model for ametryn and metribuzin, while atrazine had a higher correlation with the Elovich equation. The Weber–Morris model did not adequately describe the adsorption process. Among the isotherms tested, the Freundlich model provided the best fit for all three herbicides. The desorption rates of the acid hydrochar were 51%, 13%, and 83% for atrazine, ametryn, and metribuzin, respectively. Therefore, hydrochar derived from passion fruit residues represents a promising alternative for the remediation of triazine herbicides.